Sherwood
SKU SW-P1727C
Engine cooling pump suitable for Cummins SW9035, 6CTA8.3M, 6CTA8.3M2
PRODUCTS
Filter By
Filter By
Engine Cooling Pumps
Gilkes/Gilmec self priming pumps have been specifically designed for marine application. They are robustly constructed and are suitable for engine cooling and most on board use including bilge pumping, deck wash down, fire fighting, fuel oil transfer, fresh water transfer and circulating duties for refrigeration and air cooling plant.
Browse Sub-Categories
Subcategories
SKU 6HS
Engine cooling pump suitable for Chongqing Cummins 4BTA3.9-G2, 6CT8.3-GM115
Jabsco
SKU JB-15298-1020
Bronze Centrifugal Impeller Kit suitable for Jabsco Sea Water Pump 15780-000 and 15780-0100
Jabsco
SKU JB-99202-1000
Major Service Kit suitable for Jabsco Sea Water Pump 15780-000 and 15780-0100
Jabsco
SKU JB-96080-0371
Mechanical seal suitable for Jabsco Sea Water Pump 15780-000 and 15780-0100
Gilkes
SKU 248-2858, 11R1280
Engine cooling pump suitable for 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B,3516C
STÜBBE
Bearing Carrier Gr. 3 ALET 32-160 to 65-200 Pos 330
Gilkes
Priming impeller suitable for pump 318-2579
Sherwood
SKU SW18742
Housing for sea water pump 1730
Moyno
SKU 42202
Progressing Cavity Grinder Pump, Pump End only with 56C mounting adapter for 56C frame 1 HP, 1750 RPM motor. Fitted with : Cast Iron Body, 416 Stainless Steel Rotor, Buna Stator. Ports are 4 inch NPT male connection...
Moyno
SKU 22002
Progressing Cavity Pump, Bare Shafted Pump End only. Fitted with : 316 Stainless Steel Body, 316 Stainless Steel Rotor, Buna Stator, Buna Mechanical Seal. 3/8 Inch NPT
Moyno
SKU A4015A
The Moyno A4015A pump is a progressive cavity pump model. It is a positive displacement pump that handles a wide range of viscosities and solids, with features like robust construction, multiple seal options, and...
SKU 30102
Progressing Cavity Pump, Bare Shafted Pump End only. Fitted with : Phenolic Body, Phenolic Rotor, Buna Stator, Buna Mechanical Seal. 1 inch OD for hose connections.
Moyno
SKU 30104
Progressing Cavity Pump, Bare Shafted Pump End only. Fitted with : Phenolic Body, Phenolic Rotor, EPDM Stator, Buna Mechanical Seal. 1 inch OD for hose connections.
Moyno
SKU 22051
Progressing Cavity Pump and Motor Unit. Close Coupled to a 1/8 Horsepower, 115 Volts, 1 Phase Motor. Fitted with : Phenolic Body, Phenolic Rotor, Buna Stator, Buna Mechanical Seal. 5/8 Inch ID hose
Bombas Ideal
SKU RN32 160 & RN50 160
Pumps RN and RNI are horizontal end suction centrifugal pumps with single impeller. Feet are casted together with the pump casing wich is open at the back to allow the rotating parts been dismantled without disturbing...
GVR
SKU BC 50/C
GVR Pompe SRL B, BC, MBM, MBMC pumps are volumetric gear pumps suitable for transferring lubricant viscous liquids without any suspended solids or abrasive substances. They are self-priming pumps used for a wide range...
Gilkes
SKU GG124363-1
Engine cooling pump suitable for Cummins K38,QSK38CM2150MCRS, QSK38CM850MCRS, G38,KTA38GCCM558, QSK38CM2150K106
SKU 22001
Progressing Cavity Pump, Bare Shafted Pump End only. Fitted with : Aluminum Body, Phenolic Rotor, Buna Stator, Buna Mechanical Seal. 3/8 Inch NPT